Blog
Pedego Ridge Rider 2 Review
We do the speed test for a few central reasons. First, it gives us an understanding of how a bike is programmed; generally, we’re looking for predictable, incremental increases in speed as you move through the assist levels. It also shows us if the bike reaches/adheres to its advertised speeds.
The Ridge Rider 2 is equipped with torque and cadence sensors, as well as class 2 and 3 speeds. We tested each combination of these to get a picture of Pedego’s programming approach – however, I do want to note that this bike has a choice of 3 riding modes (Mellow, Standard, and Pedego) as well as some PAS tuning options. These were left in their out-of-the-box presets.
I began the speed test by pedaling with no assist power. I averaged 7.0 mph here; the Ridge Rider 2 does ask for fairly strong pedaling without the motor, so I’d avoid running out of battery when possible.
At class 2 speeds while using the torque sensor, I averaged 11 mph in PAS 1, 16 mph in PAS 2, and then topped out at 20 mph in PAS 3.
In the class 3 torque test, PAS 1 saw 10 mph, PAS 2 saw 17 mph, and PAS 3 reached 28 mph with some extra pedal encouragement.
Cadence mode takes a slightly different approach. Instead of 3 PAS levels, there are 5, and each one comes with a preset speed limit.
At class 2 speeds, cadence mode yielded 7 mph in PAS 1, 11 mph in PAS 2, 14 mph in PAS 3, 17 mph in PAS 4, and 20 mph in PAS 5.
Class 3 mode saw the bike reach 12 mph in PAS 1, 16 mph in PAS 2, 20 mph in PAS 3, 24 mph in PAS 4, and 27 mph in PAS 5.
That’s a lot of data; so, let’s break this down into a few core themes.
First and foremost, this Ridge Rider 2 is approachable and well-programmed. There is little overlap between assist levels, and each step-up in power feels significant yet controllable. Torque mode features fewer assist levels, but riders can still modulate speed based on their pedal input. I found the sensor to be responsive, so despite the fact that we typically see more PAS levels, this method works well for the Ridge Rider 2.
Cadence mode is oriented around speed limits in each of its 5 PAS levels. It offers a very relaxed pedal experience – you can put very little effort in and receive a lot back from the motor, but you’ll typically cruise right up to the preordained speed cap. Because of this, most of your speed control is done by selecting an assist level – your pedal input has less to do with it.
We also tested the Ridge Rider 2’s twist throttle. It delivers easy power off the line, then smoothly ramps up. It’s decently peppy, but still very manageable. Out of the box, it’s programmed to require two twists to activate; this is a safety feature that can be turned off in settings. I like the safety first mentality, but prefer this to be disabled for easier traffic merging.
Overall, this bike posts a good showing in the speed test. It’s easy to access the power while still hitting the marks on safety and legality.